How to remove water in the crawl space in your home?

Owners and tenants of residential and commercial properties wish to keep their property clean, attractive and well protected. On the other hand, they get ever-increasing problems associated with the plumbing system, electrical system, crawl space moisture, and poor air circulation. If they search for how to deal with the wet or damp crawl space in their property, then they can get loads of options. They can focus on everything associated with such options and make a better-informed decision to dry out damp or wet crawl space.  They understand as well as ensure that water in the crawl spaces leads to various problems. Though the crawl space is a remote area of the home, water pools in this area lead to a wide range of problems. Darkness and moisture in crawl spaces welcome and comfort mold. This mold spreads through the ventilation system and gives different health problems.  

Causes of water and moisture in the crawl spaces  

As a beginner to the problems associated with the water or moisture in the crawl spaces, you can focus on some basics about causes and solutions to this problem. Focus on the following details and get an overview of the foremost causes of the water in the crawl spaces. 

  • Poor grading on the surrounding landscape 
  • Downspouts and gutter issues 
  • Over-watering flower beds 
  • Ruptured water lines 
  • Subterranean water  

How to identify the source of water related problems  

Identifying the water problems in the crawl space is a challenging task when you do not have expertise in this work. This is because sources of crawl space water problems vary from ground vapor to deep pools of standing water. You have to inspect different things in crawl spaces from inside of the crawl spaces more than a few times in different conditions like wet weather and dry weather. You require the following tools and supplies to be successful in your way to identify the water problems in crawl spaces. 

  • Protective clothing 
  • Plastic sheet 
  • Flashlight  

The first step to find out and assess water problems in the crawl space is to locate the access opening to the crawl space. This place is sometimes an outside hatchway in the exterior wall around the crawl space or hatch in the floor usually in the utility or closet area. You have to enter the crawl space with the sturdy work clothes, plastic sheeting, and a good flashlight. Now, inspect each area and ensure about everything visible in the structural members and ground of the house above you. Take note of signs of puddling and standing water on the ground, discoloration caused by mildew.  

Individuals who find the standing water on the ground while inspecting the crawl spaces, they can identify whether the source of the water is water flowing in, groundwater or seeping up from the ground or a leak in the plumbing fixture, water supply pipe or drain pipe below the floor of the house.  

Explore water mitigation techniques  

It is the right time to fix the water problems in the crawl space rather than simply cleaning out and dry out the crawl spaces. You can protect the walk areas with kraft or plastic contractor’s paper when you require bringing in materials via the house and down the access door. You must remove the vapor barrier, rolled it up and remove it via the access door. A trench is usually dug around the overall interior foundation. A proper trenching on time is very important. You can lay down the flexible perforated drain pipe and use every chance to enhance the crawl space free from moisture and water.  

The drain pipe must be covered with the drain rock filling in the trench and remaining soil from digging is spread around the crawl space. You can contact and hire an electrician to install the ground-fault protected outlet. If you have done it, then install the sump pump and discharge pipe. The next step is to lay a new vapor barrier and proper ventilation is very important.  

Four simple steps to dry crawl spaces  

Everyone has a busy timetable and ever-increasing requirements to maintain their property attractive, valuable and free from problems like water in the crawl spaces. If they search for the simple yet effective methods to dry crawl spaces, then they can focus on the following details.  

  • Stop water from entering the crawl space 
  • Dry out the crawl space by removing the puddles and moisture source 
  • Clean up the crawl space 
  • Keep moisture out of the crawl space with the crawl space encapsulation  

There are different methods to stop water from entering the crawl space. You have to inspect the crawl space foundation for any crack and call in a professional to deal with the structural problem in your property as quickly as possible. You can repair any leak and insulate every cold-water pipe. The next step is to check grading, gutters, and drainage to ensure that these things do not contribute to the moisture in the crawl spaces.  

More than a few choices to clean up the crawl space may confuse you. You have to replace the wet insulation at first and remove all debris. Once you have done such things, you can scrub mold off all surfaces without compromising your safety. Rodent droppings contain very dangerous viruses and bacteria. You can prefer and use a professional cleaning service to keep away from the possibilities of health problems.  

Experts in the property maintenance sector use and recommend the first-class sump pump for removing any additional moisture. They lay a 20mil vapor barrier over the floor and also up the wall. You can install the energy-efficient crawl space dehumidifier and keep the space dry. The next step is to condition the crawl space air. Many people do not have an idea to make an entry when there is no crawl space access door. They have to properly inspect the crawl space and fix all the sources of water entry and moisture. They get different benefits from the proper use of the resources and techniques to remove water and moisture from the crawl spaces.